Downloads

6 June 2017
NEWS:  FsXPand.exe 7.1 for FSUIPC5 update (7.1.77) released. Will connect to Prepar3D v4.
Download FsXpand update
To be copied over your existing FsXPand.exe in your FsXPand folder

In response to a few questions lately:
FsXPand is not dead. I just haven't found the time yet for the next update. Live is full of distractions and they are not always under our control ;-)

9 0ctober 2014
We have a patch for you, fixing the annunciator bug (only needed for the Basic version)

23 August 2014
NEWS:  FsXPand/FsClient 7.1 update (7.1.7) released. All previous patches included.
There is no update patch but a complete new install. Please reinstall if you have a previous version.  Backup your custom panels to use them again in 7.1.7.
Download FsXpand and FsClient version 7.1 (63 Mb)
The unlicensed (demo) version is fullly functional and has ample free unpaused airtime. You need an upgrade to your 5.7, 5.8 or 6.x license (see order page).
-> Don't forget to install the fonts from \fonts into your Windows\fonts dir.

Added:
- Dash-8 100 gauges
- a few fonts added

Changes:
- we haved condensed the package a bit further. All frame files are now only to be found in the Imagery\Frames directory.
No categorization is present.

14 July 2014
NEWS:  FMS version from the installation of 2 May (7.1.6) fails to bring up the CDU in the client. Here's a replacement for the FsXPand.exe.

9 June2014
NEWS:  Replacement for a few files when importing a flightplan fails - Acffiles.zip

13 may 2014
NEWS:  Error in values Oil combi - patch

2 May 2014
FsXPand/FsClient 7.1 update (7.1.6.) released. All previous patches included.
Download FsXpand and FsClient version 7.1 (63 Mb) (no longer available)

Added:
- Cessna C208 Caravan
- Alternative engine gauges for Caravan (Hawkeye)

Changes:
- although the contents of the Caravan are considerable, the package has only grown a few MB.
- we did a cleanup of all gauge files. Each panel directory contains only the gauge files needed.
- we did a cleanup of all bitmap files. All available frames are now in \Imagery\Frames. Please don't touch the needles directory; it is needed.
- frame files have been categorized for gauge type
- on selecting a frame, the dialog points now to directly to the frames folder
- you can now see the entire (possibly too long) path to your file by hovering with the mouse
- a few fonts added

Bugs:
- error occurring while removing a custom label
- annoyance: index of labels as shown in the properties window corercted
- with a reversed scale, start values other than zero caused wrong needle values. You can now safely add negative values as well without tricks.
- when selecting a Collins Horizon, an error occurs (subscript) (wrong hori.ini file in Repository)
- several gauge files replaced in Repository

Thanks again to Sam Lambros for his outstanding graphical work on several gauges!

1 May 2014
There is only one version of FsXPand supported: 7.x. If you are a registered user, you can still request version 6.x by sending us an e-mail.

27 January 2014
On updating the database from Navigraph, you may get a database version error. Corrected in the patch.
This one replaces all previous patches. Patch_270114

8 January 2014
We have uploaded a few fixes for FsClient: Patch_070114
- The Cessna AI showed a wrong pitch value
- Adjusting the altitude by changing the barometric setting was inaccurate
- A bug removed when saving a gauge
FsClient version number 7.1.0.4. Please unzip and copy all files in their appropriate folders. FMS version users only need the cpflight.exe in \childapps.
Patches since 19 may 2013 and file replacements included.

11 September 2013
When using the Bendix VOR2, you may get an error. The problem is in the Vor2.ini file. Here is a replacement, the file is in your FsClient\cockpits\[yourcockpit]\gauges# folder. Please don't forget to replace the source file in FsClient\Repository\Bendix folder.

24 June 2013
Vertical speed indicator may run through the limits. Please apply the patch Patch_240613.zip
In some cases, the NeedleStopValue in the Verti.ini file has a wrong value. If your lowest value is 2000 ft/min, set NeedleStopValue=-2 to make the needle stop when descent rate is below -2000 fpm. We will correct all values with the next full release.

19 May 2013
FsXPand/FsClient 7.1 released. All patches included. This is the final version. There is no update patch but a complete new install. Please reinstall if you have already version 7.0 on your system.
The unlicensed (demo) version is fullly functional and has ample free unpaused airtime. You need an upgrade to your 5.7, 5.8 or 6.x license (see order page).
Download FsXpand and FsClient version 7.1 (59 Mb)

Download FsXpand and FsClient Light Version 7.1 (40 Mb) (no longer available)

The use of FsXPand, exceeding private purposes, is not allowed without the extended license, which covers public, commercial and professional use. Please contact us to the right license.
There is a separate download for the Extended license version at http://fsxpand.com where you can find details.

27 April 2013
In a number of gauges, the NeedleStopValue was incorrect, causing the gauge to miss negative values: PFD, ND#, Turnc, Verti, Alti, Hori, AInd
Download the complete templates directory as a replacement. If you find such an error, you can copy the gauge from there to your
appropriate panel directories.
Next release 7.1 will contain all corrected files in place.

4 April 2013
Light version correction: Missing file. If you cannot load the 737 panel, please download again

6 March 2013
The manual has been updated.

1 March 2013
FsXPand/FsClient 7.008 containing all enhancements since release. All patches included. This is the beta version. The unlicensed (demo) version is fullly functional and has ample free unpaused airtime. You need an upgrade to your 5.8 or 6.x license (see order page).
Download FsXpand and FsClient version 7.0 (50 Mb)

FsXPand/FsClient 7.008 Light Version. This is the beta version. This light version is limited in functionality (see home page) and has ample free unpaused airtime.
Download FsXpand and FsClient Light Version 7.0 (40 Mb)


28 February 2013
Download a patch: Switching the ND modes may cause a crash in FsClient. Copy the files to their respective directories and overwrite the existing ones.

28 February 2013
Download a patch: Version number corrected in the FMS database, it remained to come up.

26 February 2013
Download Bendix/King HSI/VOR/ADF gauges set and digital clocks containing OAT and Volts indications
Contains an update for the Cessna ASI as well to correct a small problem.
Unzip and copy the Bendix, Cessna and Flyware folders to your Repository and GBmp folders in FsClient 7.0 respectively. Overwrite existing files. VOR1/2 is already in the 7.006 installation, just overwrite the files.

21 February 2013

FsXPand/FsClient 7.0 Light Version available for download. This is the beta version. Thie light version is limited in functionality (see home page) and has ample free unpaused airtime.
Download FsXpand and FsClient Light Version 7.0 (22 Mb)

15 February 2013
FsXPand/FsClient 7.0 available for download. This is the beta version. The unlicensed (demo) version is fullly functional and has ample free unpaused airtime. You need an upgrade to your 5.8 or 6.x license (see order page). Soon: light version available.
Download FsXpand and FsClient version 7.0 (46 Mb)

This version has been enhanced with a lot of new gauges. With the cooperation of Sam Lambros, we now have a gorgeous set of Cessna gauges now. It is not finished entirely, but we didn't want to wait.

Please note:
If you are upgrading, please remove the shares on FsXPand and FsClient 5 or 6, for the 7.0 version will be unable create new ones for you otherwise. And look in the wrong folders causing errors.
An import function for your 6.x gauges only is included
A few features are disabled in the beta, gauge properties, advanced not useable yet.

Any problems, please report.

27 February 2012
Since 2012, patches will have an expiry date. Only registered users will be able to use them indefinitely.

16 January 2012
If you want to run version 6.2: FsXPand_patch_6.2.2.zip On request only
Please copy the extracted files in the appriopriate directories. You may keep a backup of the old files in case you want to switch back.
This version has the following enhancements:

1. GPS - NAV switch added in key commands

Please use a custom label for display:
On your EICAS panels, Panel Setup button, tick Custom Label, OK.
R-Click CustomLbl1, replace CustomLbl with 'GPS switch'.
Change your front and back colours, OK.
R-click Value
choose Parameter not text.
choose from droplist 'GPS switch'.
set colours, OK.
Drag both into place

2. Autobrake is in EICAS 1 annunciator now.

Bugfix:
- X-Plane does really work on FsXPand 6.2, still under testing.
- When using "Active Sky"  or the default "Real world weather" FsClient ND may crash in MAP EXP, MAP CENT or PLAN mode.
(overflow, runtime error 6). On weather updating, ground speed coming from FS goes to 0 momentarily.


1 December 2011
Newest feature/bugfixes: Patch your existing version with FsXPand_patch_301111.zip On request only
Copy results of the unzip in the appropriate directories. All previous patches included.
If you downloaded before 1-12, please do it again.... something went wrong.
Contains a new bitmap for the PFD mask to correct the bleed of the IAS scale as of 3-12

Bug fixes:
- Both versions: Heading bug missing  - erroneously shows only in HDG SEL mode.
- Basic version: No AP speed when changing FS value

New feature:
Trim indicator - There is now an option 'invert' in the advanced properties to change the direction.

25 November 2011

Version 6.1 available:
Download FsXpand and FsClient version 6.1 (40 Mb)  On request only

- Losing LNAV on a course close to 0 or 180
- DEPARR: RSK1 error
- EICAS thrust modes not correct
- EICAS N1 target digit stuck
- wrong  course in LEGS for 1st wpt
- wrong fuel at DES in CRZ page
- and some minor fixes

CPFlight MCP/EFIS/Radios compatible.
All MCP states are now written to custom offsets for your own DIY MCP, only values are written to FS AP offsets.

Please report any errors.
Do you get an Unexpected Error, Quitting? Switch off UAC.
Do you get an error 75, Path or File access error? Check your permissions, are you full administrator, is your folder ownership OK?
You may need to install in C:\FsXPand or C:\FsClient.





Back to Flyware